IP Configuration Command Set
Configuring Dynamic Host Configuration Protocol (DHCP)
Table 12-12 DHCP Command Modes (Continued)
Mode
DHCP Host
Configuration
Mode
Commands
The commands used to configure DHCP are listed below and described in the associated section as
shown:
•
ip dhcp server
(Section
•
ip local pool
(Section
•
exclude
(Section
•
ip dhcp ping packets
•
ip dhcp ping timeout
•
ip dhcp pool
(Section
•
domain-name
(Section
•
dns-server
(Section
•
netbios-name-server
•
netbios-node-type
•
default-router
(Section
•
bootfile
(Section
•
next-server
(Section
•
option
(Section
•
lease
(Section
12.2.9.15)
•
host
(Section
12.2.9.16)
12-114 Matrix DFE-Platinum and Diamond Series Configuration Guide
Usage
Configure DHCP
host parameters.
12.2.9.1)
12.2.9.2)
12.2.9.3)
(Section
12.2.9.4)
(Section
12.2.9.5)
12.2.9.6)
12.2.9.7)
12.2.9.8)
(Section
12.2.9.9)
(Section
12.2.9.10)
12.2.9.11)
12.2.9.12)
12.2.9.13)
12.2.9.14)
Access Method
Type
client-identifier and
the identifier, or
hardware-address
and an address from
any DHCP
configuration mode.
Resulting Prompt
Matrix>Router1
(config-dhcp-host)#