Security Configuration Command Set
Configuring 802.1X Authentication
Commands
The commands used to review and configure 802.1X are listed below and described in the
associated section as shown:
•
show dot1x
(Section
•
show dot1x auth-config
•
set dot1x
(Section
•
set dot1x auth-config
•
clear dot1x auth-config
14-40 Matrix DFE-Platinum and Diamond Series Configuration Guide
14.3.5.1)
(Section
14.3.5.2)
14.3.5.3)
(Section
14.3.5.4)
(Section
14.3.5.5)