Enterasys Matrix 2G4072-52 Configuration Manual page 913

Table 11-14 show sntp Output Details
Output
SNTP Version
Current Time
Timezone
Client Mode
Broadcast Delay
Broadcast Count
Poll Interval
Poll Retry
Poll Timeout
SNTP Poll
Requests
Last SNTP Update Date and time of most recent SNTP update.
Last SNTP
Request
Last SNTP Status
SNTP-Server
Precedence
Status
Matrix DFE-Platinum and Diamond Series Configuration Guide
Logging And Network Management Command Set
Configuring Simple Network Time Protocol (SNTP)
What It Displays...
SNTP version number.
Current time on the system clock.
Time zone name and amount it is offset from UTC
(Universal Time). Set using set timezone command
(Section 11.2.6.15).
Whether SNTP client is operating in unicast or broadcast
mode. Set using set sntp client command
Round trip delay for SNTP broadcast frames. Default of 3000
microseconds can be reset using the set sntp broadcastdelay
command (Section 11.2.6.6).
Number of SNTP broadcast frames received.
Interval between SNTP unicast requests. Default of 512
seconds can be reset using the set sntp poll-interval
command (Section 11.2.6.8).
Number of poll retries to a unicast SNTP server. Default of 1
can be reset using the set sntp poll-retry command
(Section 11.2.6.10).
Timeout for a response to a unicast SNTP request. Default of
5 seconds can be reset using set sntp poll-timeout command
(Section 11.2.6.13).
Total number of SNTP poll requests.
Date and time of most recent SNTP update.
Whether or not broadcast reception or unicast transmission
and reception was successful.
IP address(es) of SNTP server(s).
Precedence level of SNTP server in relation to its peers.
Highest precedence is 1 and lowest is 10. Default of 1 can be
reset using the set sntp server command
Whether or not the SNTP server is active.
(Section 11.2.6.2).
(Section 11.2.6.4).
11-123