Enterasys Matrix 2G4072-52 Configuration Manual page 696

Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
macdest
macsource
tci
tcpdestport
tcpsourceport
udpdestport
udpsourceport
vlantag
data
mask mask
port-string
port-string
port-list port-string (Optional) Specifies disabled port(s) to remove from
Command Defaults
•
•
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear rule usage statistics pertaining to all ports and all classification
rules:
Matrix(rw)->clear policy usage-list all
8-52 Matrix DFE-Platinum and Diamond Series Configuration Guide
Clears MAC destination address rule usage statistics.
Clears MAC source address rule usage statistics.
Clears Tag Control Information rule usage statistics.
Clears TCP destination port rule usage statistics.
Clears TCP source port rule usage statistics.
Clears UDP destination port rule usage statistics.
Clears UDP source port rule usage statistics.
Clears VLAN tag rule usage statistics.
(Optional) Specifies an associated data value entry. Refer
to
(Optional) Specifies an associated data mask. Refer to
Table 8-3
data value.
(Optional) Specifies rule usage port scope.
usage list.
When applicable, data, mask and port-string must be specified for individual
rules to be cleared.
If not specified, all ports will be removed from usage lists.
Table 8-3 for valid values for each classification type.
for valid values for each classification type and