Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6.2.1.59
clear spantree spanguardtimeout
Use this command to reset the Spanning Tree span guard timeout to the default value of 300
seconds.
clear spantree spanguardtimeout
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the span guard timeout to 300 seconds:
Matrix(rw)->clear spantree spanguardtimeout
6-72 Matrix DFE-Platinum and Diamond Series Configuration Guide