Enterasys Matrix 2G4072-52 Configuration Manual page 774

IGMP Configuration Command Set
Configuring IGMP
Table 10-1 show igmp config Output Details
Output
VlanQueryInterval
VlanStatus
Vlan IGMP Version
VlanQuerier
VlanQueryMaxResponse
Time
VlanRobustness
VlanLastMemberQueryIntvl Last member query interval. This is the maximum
VlanQuerierUpTime
10-14 Matrix DFE-Platinum and Diamond Series Configuration Guide
What It Displays...
Frequency (in seconds) of host-query frame
transmissions.
Whether or not VLAN configuration is Active or
Not in Service.
Whether or not IGMP version is 1 or 2.
IP address of the IGMP querier.
Maximum query response time (in tenths of a
second).
Robustness value
response time inserted into group-specific queries
which are sent in response to Leave Group
messages. It is also the amount of time between
group-specific query messages.
Time (in seconds) the IGMP querier has been
active.