Enterasys Matrix 2G4072-52 Configuration Manual page 1043

Table 12-9 show ip slb reals Output Details
Output
Server Farm
Real Server IP
Real Server Port
Fail Detect
Ping/App Retries
Fail Detect Type
Current
Connections
Current State
Maximum
Connections
Real Server
Weight
In Service / Not In
Service
Matrix DFE-Platinum and Diamond Series Configuration Guide
Configuring Load Sharing Network Address Translation (LSNAT)
What It Displays...
Name of the server farm associated with this server.
Assigned using the ip slb serverfarm command as
described in Section
Address of the real server(s) assigned to this server farm.
Assigned using the real command as described in
Section 12.2.8.4.
Port number assigned to this server.
Number of failure detection ping or TCP application retries
that will result in an error condition on this server. Defaults
can be changed using the faildetect command as described
in Section 12.2.8.9.
Whether or not the failure detection mechanism is ICMP
ping, TCP application, both, or none. Assigned using the
faildetect command as described in
Number of active connections on this server.
Operational state of this server.
Number of maximum connections allowed on this server.
Default of unlimited can be changed using the maxconns
command as described in
Weight load number of the real server. Default of 1 can be
changed using the weight command as described in
Section 12.2.8.11.
Whether or not this server is enabled (using the inservice
command as described in
IP Configuration Command Set
12.2.8.3.
Section
Section 12.2.8.10.
Section 12.2.8.8).
12.2.8.9.
12-83