Set Authentication Login - Enterasys Matrix 2G4072-52 Configuration Manual

14.3.1.2

set authentication login

Use this command to set the authentication login method.
set authentication login {any | local | radius | tacacs}
Syntax Description
any
local
radius
tacacs
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to set the authentication login method to use the local password settings:
Matrix(rw)->set authentication login local
Specifies that the authentication protocol will be selected
using the following precedence order:
•
TACACS+
•
RADIUS
•
Local
Specifies that the local network password settings will be
used for authentication login.
Specifies that RADIUS will be used for authentication
login.
Specifies that TACACS + will be used for authentication
login
Matrix DFE-Platinum and Diamond Series Configuration Guide
Security Configuration Command Set
Setting the Authentication Login Method
14-7