Show Rmon History - Enterasys Matrix 2G4072-52 Configuration Manual

11.2.4.4

show rmon history

Use this command to display RMON history properties and statistics. The RMON history group
records periodic statistical samples from a network.
show rmon history [port-string] [wide] [interval]
Syntax Description
port-string
wide
interval
Command Defaults
If port-string is not specified, information about all RMON history entries will be
displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display RMON history entries for Fast Ethernet port 14 in module 3.
A control entry displays first, followed by actual entries corresponding to the control entry. In this
case, the default settings for entry owner, sampling interval, and maximum number of entries.
(buckets) have not been changed from their default values (as described in
description of the types of statistics shown, refer to
Logging And Network Management Command Set
(Optional) Displays RMON history entries for specific
port(s).
(Optional) Display most important stats, one line per entry.
(Optional) Summarize history over a fixed interval.
Table
Matrix DFE-Platinum and Diamond Series Configuration Guide
Section
11-6:
Configuring RMON
11.2.4.5). For a
11-53