Enterasys Matrix 2G4072-52 Configuration Manual page 1119

13.2.2.12 accept-lifetime
Use this command to specify the time period during which an authentication key on a key chain is
valid to be received.
accept-lifetime start-time month date year {duration seconds | end-time |
infinite}
Syntax Description
start-time
month
date
year
duration seconds
end-time
infinite
Command Syntax of the "no" Form
The "no" form of this command removes the accept-lifetime configuration for an
authentication key:
no accept-lifetime start-time month date year
Command Type
Router command.
Specifies the time of day the authentication key will begin to
be valid to be received. Valid input is
hours:minutes:seconds (hh:mm:ss)
Specifies the month the authentication key will begin to be
valid to be received. Valid input is the first three letters of
the month.
Specifies the day of the month the authentication key will
begin to be valid to be received. Valid values, depending on
the length of the month, are 1 - 31.
Specifies the year the authentication key will begin to be
valid to be received. Valid input is four digits up to 2035.
Length of time (in seconds) the key is valid to be received.
Valid values are 1 - 4294967295.
Specifies the hours, minutes and seconds (hh:mm:ss) and
the month, date and year from the start-time the key is valid
to be received.
Specifies that the key is valid to be received from the
start-time on.
Matrix DFE-Platinum and Diamond Series Configuration Guide
Routing Protocol Configuration Command Set
Configuring RIP
13-17