Enterasys Matrix 2G4072-52 Configuration Manual page 974

IP Configuration Command Set
Managing Router Configuration Files
12.2.2.2 write
Use this command to save or delete the router running configuration, or to display it to output
devices.
write [erase | file [filename config-file] | terminal]
NOTE: The write file command must be executed in order to save the router
configuration to NVRAM. If this command is not executed, router configuration changes
will not be saved upon reboot.
Syntax Description
erase
file
filename
config-file
terminal
Command Type
Router command.
Command Mode
Privileged EXEC: Matrix>Router1#
Command Defaults
If no parameters are specified, the running configuration will be displayed to the
terminal session.
12-14 Matrix DFE-Platinum and Diamond Series Configuration Guide
(Optional) Deletes the router-specific file.
(Optional) Saves the router-specific configuration to
NVRAM.
(Optional) Saves the router-specific configuration to a file.
(Optional) Displays the current router-specific
configuration to the terminal session.