Ip Slb Ftpctrlport - Enterasys Matrix 2G4072-52 Configuration Manual

IP Configuration Command Set
Configuring Load Sharing Network Address Translation (LSNAT)
12.2.8.2

ip slb ftpctrlport

Use this command to specify an FTP control port for load balancing functionality. By default, this
is port 21.
ip slb ftpctrlport port-number
Syntax Description
port-number
Command Syntax of the "no" Form
The "no" form of this command resets the FTP control port to 21:
no ip slb ftpctrlport
Command Type
Router command.
Command Mode
Global configuration mode: Matrix>Router1(config)#
Command Defaults
None.
Example
This example shows how to specify port 46 as the FTP control port for server load balancing:
Matrix>Router1(config)#ip slb ftpctrlport 46
12-76 Matrix DFE-Platinum and Diamond Series Configuration Guide
Specifies an FTP port number