IP Configuration Command Set
Configuring Load Sharing Network Address Translation (LSNAT)
12.2.8.25 show router limits
Use this command to display LSNAT router limits.
show router limits [lsnat-bindings] | [lsnat-cache] | [lsnat-configs]
NOTE: This command must be executed from the switch CLI.
Syntax Description
lsnat-bindings
lsnat-cache
lsnat-configs
Command Type
Switch command.
Command Mode
Read-Only.
Command Defaults
If no options are specified, all LSNAT router limits (including the route table limit
setting as shown in
Example
This example shows how to display the LSNAT cache size:
Matrix(rw)->show router limits lsnat-cache
LSNAT Cache size
12-108 Matrix DFE-Platinum and Diamond Series Configuration Guide
(Optional) Displays the LSNAT maximum bindings limit.
(Optional) Displays the LSNAT cache size limit.
(Optional) Displays the LSNAT configuration limit.
Section
12.2.6.1) will be displayed.
-
2000
(default)