Show Port Txq - Enterasys Matrix 2G4072-52 Configuration Manual

Port Priority and Rate Limiting Configuration Command Set
Configuring Quality of Service (QoS)
9.3.3.1

show port txq

Use this command to display QoS transmit queue information for one or more ports.
show port txq [port-string]
Syntax Description
port-string
Command Defaults
If the port-string is not specified, the QoS setting of all ports will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the current algorithm and transmit queue weights configured
on fe.2.1 through 5:
Matrix(rw)->show port txq fe.2.1-5
Port Alg Q0
----- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
fe.2.1 STR 25% 25% 25% 25% N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
fe.2.2 STR 25% 25% 25% 25% N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
fe.2.3 STR 25% 25% 25% 25% N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
fe.2.4 STR 25% 25% 25% 25% N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
fe.2.5 STR 25% 25% 25% 25% N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
9-12 Matrix DFE-Platinum and Diamond Series Configuration Guide
(Optional) Specifies port(s) for which to display QoS
settings. For a detailed description of possible port-string
values, refer to
Q1 Q2 Q3 Q4
Section
Q5 Q6 Q7 Q8
4.1.1.
Q9 Q10 Q11 Q12 Q13 Q14 Q15