8.3 Transport Lighting
8.3.1 Lighting (With Road Friendly Transport
The disc mower is equipped with two bidirectional amber
lights (A) located on the outboard edges of the carrier frame
that function as flashing hazard lights and turn signals.
The red lights (B) located on the inboard side of the amber
lights function as both tail and brake lights. Refer to the disc
mower operator's manual for information about connecting
the electrical harness to the tractor.
Amber reflective tape is applied to various locations on the
front and sides of the disc mower, hitch, and carrier frame.
Red reflective tape is applied to the rear of the disc mower.
8.3.2 Lighting (Without Road Friendly Transport
The disc mower is equipped with two bidirectional amber
lights (A) located on the outboard edges of the carrier frame
that function as flashing hazard lights and turn signals.
The red lights (B) located on the inboard side of the amber
lights function as both tail and brake lights. Refer to the disc
mower operator's manual for information about connecting
the electrical harness to the tractor.
Amber reflective tape is applied to various locations on the
front and sides of the disc mower, hitch, and carrier frame.
Red reflective tape is applied to various locations on the
disc mower.
214713
TRANSPORTING THE DISC MOWER
157
™ ™
Option)
Figure 8.7: Lighting Locations (with Road
™ ™
Friendly Transport
)
™ ™
Option)
B
Figure 8.8: Lighting Locations
B
A
A
Revision A