Table of Contents
Advertisement
5.7.2 ENGINE-FORWARD LIGHTING: ROAD
The following lights are on/functional when the
switch is in the ROAD position. The hazard lights
must be activated with the switch on the Cab
Display Module (CDM) when driving on the road.
TURN SIGNALS / HAZARDS – AMBER
TAIL / BRAKE LIGHTS – RED
REAR: ENGINE-FORWARD
TURN SIGNALS / HAZARDS – AMBER
HIGH / LOW - ROAD
FRONT: ENGINE-FORWARD
169469/169470/169471
OPERATOR'S STATION
5.7.3 CAB-FORWARD LIGHTING: ROAD
If equipped, the following lights are functional
when the switch is in the ROAD position. The
hazard lights must be activated with the switch on
the Cab Display Module (CDM) when driving on
the road.
29
(OPTIONAL)
IMPORTANT
Optional red tail lighting and marking kit must
be installed so that road travel in the
cab-forward mode complies with road travel
regulations. See your MacDon Dealer.
HIGH / LOW - ROAD
TURN SIGNALS / HAZARDS – AMBER
FRONT: CAB-FORWARD
TURN SIGNALS / HAZARDS – AMBER
TAIL LIGHTS - RED
(If Installed)
SMV SIGN
REAR: CAB-FORWARD
Revision E
Advertisement
Table of Contents
