Replacing Speed Identification Symbol Decal - For Windrowers Used In The United States Of America Only - MacDon M2170 Unloading And Assembly Instructions

3.10 Replacing Speed Identification Symbol Decal – For Windrowers used
in the United States of America only
The speed identification symbols will need to be installed on windrowers intended for use in the United States of America.
1. Retrieve 30 mile/h decal (A) (MD #208900) from the
document package that contained this manual.
2. Locate the already installed speed identification symbol
(SIS) decal bracket on the left mirror/lighting arm.
3. Wipe the already installed decal with a clean cloth to
remove any dirt or grease.
4. Apply 30 mile/h SIS decal (A) over the already installed
45 km/h decal.
262175
ASSEMBLING WINDROWER
A
Figure 3.45: SIS Decal – USA Only
A
Figure 3.46: SIS Decal – USA Only
42
Revision A