Replacing Driveshield Latch - MacDon R113 Operator's Manual

1. Position driveshield (A) onto pins (B) at base of
driveshield.
2. Push driveshield to engage latch (C).
3. Check that driveshield (A) is properly secured.
4. Replace tool (B) and lynch pin (A) on pin (C).

Replacing Driveshield Latch

CAUTION
Do NOT operate the machine without the driveshields in place and secured.
NOTE:
Images shown are for left side driveshield—right side driveshield is similar.
214077
MAINTENANCE AND SERVICING
Figure 4.134: Driveshield and Latch
Figure 4.135: Tool to Unlock Driveshield
167
B
B
A
B
C
A
C
Revision A