7.12.3
Field lights - Cab Forward
7.12.3.1 Adjustment
The field lights are best adjusted with the
machine in the field or the equivalent to suit
operator preference.
a. Hold onto the hand-holds (A) on the cab front
corners and stand on the header anti-slip strips.
b. Adjust the lights with screws (B).
7.12.3.2 Bulb Replacement
a. Remove the two screws (G) and remove light
assembly.
b. Replace the bulb as described in Section
7.12.2.2.
Form 169017
MAINTENANCE/SERVICE
B
A
G
177
7.12.4
Flood Lights - Forward
The forward floodlights are not adjustable.
Replace bulbs as follows:
a. Shutdown engine and remove the key. Turn off
the lights.
B
b. Hold onto the hand-holds (A) on the cab front
corners and stand on the header anti-slip strips
when removing the forward field lights.
c. Remove the two screws (B) and remove light
bezel (C).
G
d. Remove light from receptacle.
e. Pinch the wire retainer (D) and lift away from
hooks.
f.
Remove bulb (E) from body and pull wire from
connector (F).
C
A
F
E
D
(continued next page)
Issue – June 2008