Replacing Bulbs In Standard Work Lights Or Cab-Forward Headlights - MacDon M2170NT Operator's Manual

MAINTENANCE AND SERVICING

Replacing Bulbs in Standard Work Lights or Cab-Forward Headlights

Lights are an important safety feature of the windrower. Replace damaged or malfunctioning bulbs or lamps immediately.
The following procedure applies to all halogen bulbs shown in Figure 6.191, page 402. If replacing the engine-forward
Replacing Headlight Bulb – Engine-Forward, page
headlight bulbs, refer to 403.
C
D
A
A
B
Figure 6.191: Halogen Bulb Locations
A - Front Work Lights (Field) B - Stubble Lights (Rear) C - Rear Work Lights D - Headlights (Cab-Forward)
DANGER
To prevent bodily injury or death from the unexpected startup of the machine, always stop the engine and remove the
key from the ignition before leaving the operator's seat for any reason.
NOTE:
Front work light is shown.
1. Shut down the engine, and remove the key from the ignition.
402
262171 Revision A