Fuel Specifications - MacDon M155 Unloading And Assembly Instructions

6.5 Fuel Specifications

Table 6.18 Fuel Specification
Fuel Specification
Grade no. 2 ASTM D975
Grade no. 1
and 2 mix 31
In extreme situations, when available fuels are of poor quality or problems exist which are peculiar to certain
operations, additives can be used. However, the engine manufacturer recommends consultation with the fuel
supplier or engine manufacturer before using fuel additives. Situations where additives are useful include:
•
A cetane improver additive can be used with low cetane fuels.
•
A wax crystal modifier can help with fuels with high cold filter plugging points (CFPP).
•
An anti-icer can help prevent ice formation in wet fuel during cold weather.
•
An antioxidant or storage stability additive can help with fuel system deposits and poor storage stability.
•
A lubricity enhancer can be used to increase the lubricity of fuels so that they meet the requirements given in the
table on the previous page. Diesel fuel conditioner is available from your Dealer.
31. Optional when operating temperature is below 0°C (32°F).
214298
REFERENCE
Sulphur
(by weight)
0.5% maximum
1% maximum
n/a 0.5% maximum
preferred
Water and
Sediment
(by volume)
0.05% maximum
0.1% maximum
260
Cetane No. Lubricity
40°C (104°F)
520 Microns
minimum
45–55°C
(113–131°F)
460 Microns
cold weather /
high altitude
Revision A