Table of Contents
Advertisement
Float presets:
These buttons select header float presets. For instructions, refer
to
Setting Float Options with Fixed Deck, page 241
to preset the float.
NOTE:
For detailed switch operating modes, refer to the section in this
manual that is specific to your header.
Conveyor Speed Adjustment Buttons
The buttons to control header functions are located on the console.
Adjust the header or Double Windrow Attachment (DWA)
conveyor speed by pressing switch (A) to increase the speed, or
switch (B) to decrease the speed.
Conveyor speed can be adjusted in either manual or auto
modes. For instructions, refer to
page 259
for more information.
262171
OPERATOR'S STATION
to learn how
5.5.7 Adjusting Draper Speed,
A
Figure 3.70: Header Switches
A - Float Preset 1
C - Float Preset 3
Figure 3.71: Operator's Console Conveyor Controls
83
B
C
B - Float Preset 2
A
B
Revision A
Advertisement
Table of Contents
Troubleshooting
