Presetting The Spectrum Analyzer; Creating A User Preset - Agilent Technologies PSA Series Getting Started Manual

Making a Basic Measurement

Presetting the Spectrum Analyzer

Presetting the Spectrum Analyzer
Preset provides a known starting point for making measurements. The analyzer has
three types of preset:
Restores the analyzer to its factory-defined state.
Factory Preset
User Preset Restores the analyzer to a user-defined state.
This type of preset restores the currently selected mode to a
Mode Preset
known state.
For details, see the User's and Programmer's Reference.
When Preset Type is set to
factory preset. When
Preset Type
softkeys
Factory Preset
select the preset you want. If
installed, pressing
Preset

Creating a User Preset

If you constantly use settings which are not the factory defaults, use the following
steps to create a user-defined preset:
1. Set analyzer parameters as desired.
2. Press ,
System Power On/Preset
parameters as the user preset state.
3. Press Preset to select
an option.
Disabling User Preset
Go to the Power On/Preset menu (press
of
Preset Type Factory
38
Factory , pressing the green
is set to , pressing
User
, , and
User Preset Mode Preset
Preset Type is set to
triggers a factory preset.
,
Save User Preset
User in the same softkey menu to enable user preset as
,
System
or .
Mode
Preset key triggers a
displays the
Preset
(if applicable); you then
Mode , but a personality is not
to set the current
) and select a
Power On/Preset
Chapter 3