Lan Configuration -- Recorder/Agilent E9821 Dsp, Other Device (For Example, Psa Spectrum Analyzer) - Agilent Technologies E3238S Installation And Configuration Reference

Hardware Installation
If you're adding recording capability to an existing E3238s system, the LAN port on the
Agilent E9821 DSP must have its IP address set and the LAN port enabled. The
utility program in the folder is used for this
e9821LanConfigure.exe /e3238s/bin
configuration. Using this utility, set the IP address to 10.1.249.100 and set the netmask
to 255.255.0.0.
LAN Configuration -- Recorder/Agilent E9821 DSP, Other Device (for
example, PSA Spectrum Analyzer)
If the configuration includes another LAN device, such as an Agilent E444x PSA being
used as a tuner, a networking hub or switch must be used. The hub or switch will create a
private network that is typically isolated from all other LANs. For this configuration, set
the IP address of the PSA to 10.1.249.102. When a network hub or switch is used,
standard LAN cables are used (crossover cables will not work).
55