Presetting The Spectrum Analyzer; Creating A User Preset - Agilent Technologies ESA Series Getting Started Manual

Making a Basic Measurement

Presetting the Spectrum Analyzer

Presetting the Spectrum Analyzer
Preset provides a known starting point for making measurements. The analyzer has three types of
preset:
Factory Preset Restores the analyzer to its factory-defined state.
Restores the analyzer to a user-defined state.
User Preset
This type of preset restores the currently selected mode to a known state.
Mode Preset
For details, see the User's/Programmer's manual.
When Preset Type is set to
is set to
Preset Type
Mode Preset (if applicable); you then select the preset you want. If
personality is not installed, pressing

Creating a User Preset

If you constantly use settings which are not the factory defaults, use the following steps to create a
user-defined preset:
1. Set analyzer parameters as desired.
2. Press ,
System Power On/Preset
preset state.
3. Press Preset to select
Disabling User Preset
Go to the Power On/Preset menu (press
Factory or Mode .
42
Factory , pressing the green
, pressing displays the softkeys
User Preset
triggers a factory preset.
Preset
,
Save User Preset
User in the same softkey menu to enable user preset as an option.
System
Preset key triggers a factory preset. When
Factory Preset
Preset Type
to set the current parameters as the user
, ) and select a
Power On/Preset
, , and
User Preset
is set to Mode , but a
of
Preset Type
Chapter 3