Table of Contents
Advertisement
Entering a Filename Using the Arrow Keys
1 Use the front-panel step keys ( ⇑ and ⇓ ) and the arrow softkeys ( → and ← ) to
highlight each letter of the filename.
2 When the desired letter or function is selected, press the Select softkey.
3 Select the BackSpace function to delete individual letters.
4 Select the Clear Line function to delete the entire filename.
5 When you finish entering the filename, press the SAVE FILE softkey.
Entering a Filename using an External Keyboard
There must be a PS-2 keyboard installed on the WDCA prior to bootup.
1 Press [TAB] on the keyboard to highlight the entry field.
2 Enter the filename using the keyboard.
3 When you finish entering the filename, press the SAVE FILE softkey.
Saving Data in Fast Meas Save Mode
1 Press the front-panel Save/Recall key.
2 Press the Fast Meas SAVE softkey.
3 The instrument saves the current measurement state to internal memory as
FASTSAVE.dat. Only one FASTSAVE.dat file exists, so performing a Fast Meas
Save will overwrite any currently existing Fast Save file.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Using the Analyzer
Using the Navigation Softkeys on a Setup Panel
3-7
Advertisement
Table of Contents
