3.5 Meas Control
These functions allow you to pause and resume the currently selected measurement and to
select between continuous or single measurements.
If no measurement has been selected from the
NOTE
functions are not available.
Key Path:
Front-panel key
3.5.1 Restart
This function restarts a previously paused measurement at the beginning. If the current
measurement is still in process, it will stop it as soon as possible and restart it from the
beginning.
Key Path:
Front-panel key. It can also be found under
Remote Command:
:INITiate:RESTart
Remote Command Notes: This command is equivalent to sending an :ABORt command
followed by an :INITiate[:IMMediate] command. See
Measurement (Remote Command Only)" on page 194
Example:
INIT:REST
Chapter 3
Instrument Functions: M - O
Meas Control
menu, these
MEASURE
.
Meas Control
"Abort the Sweep or
. for more information.
191