Meas Control - Agilent Technologies ESA-E Series User Manual

Front-Panel Key Reference

Meas Control

Meas Control

Accesses a menu of keys that allow you to pause or restart one of the
measurements available in the
allows you to select between continuous and single sweeps or
measurements.
Press
(
ACP
Once the desired measurement is selected, press
Control
Performs the same functions as the
Restart
Measure Cont Measure (Single)
the measurement results.
Single
a measurement, displaying the results after each measurement sweep.
Allows you to pause a measurement. Pressing
Pause
between pausing and resuming your measurement. The key label will
toggle between
Allows you to resume a measurement that had been paused. The key
Resume
label will toggle between
The measurements described above are those available in SA mode (see
NOTE
Mode
optional personality is installed.
6-50
and then select one of the available measurements
MEASURE
, ,
Channel Power Occupied BW
accesses the following keys:
allows you to take one measurement sweep and display
and
Pause
key). Other measurements are available in other modes if an
key menu.
MEASURE
,
Emission BW
"Restart" front-panel key.
allows you to continuously run
Measure (Cont)
.
Resume
and .
Pause Resume
also
Meas Control
, or ).
Harmonic Dist
.
Meas Control Meas
will toggle
Pause
Chapter 6