Meas Control - Agilent Technologies ESA Series User's/Programmer's Reference

Front-Panel Key Reference

Meas Control

Meas Control
If a measurement is active, then this key accesses a menu to pause,
resume, or restart one of the measurements available in the
key menu.
and single sweeps/measurements.
Press
Once the desired measurement is selected, press
Control
Performs the same functions as the
Restart
your measurement from the beginning. Pressing
measurement is being made will halt the current measurement at the
first possible stopping point and repeat the measurement.
Key Access:
Measure Measure (Single)
measurement results.
Single Cont
measurement, displaying the results after each measurement cycle.
Key Access:
Pauses the measurement. Pressing
Pause
and resuming your measurement. The key label will toggle between
Pause
average counter is frozen and the measurement sweeping is halted.
Key Access:
114
also allows you to select between continuous
Meas Control
and then select one of the available measurements.
MEASURE
accesses the following keys:
Meas Control
takes one measurement sweep and display the
Measure (Cont)
Meas Control
and . If an averaged measurement was in progress, the
Resume
Meas Control
Meas Control
"Restart" front-panel key.It repeats
while a
Restart
allows you to continuously run a
will toggle between pausing
Pause
MEASURE
.
Meas
Chapter 2