Configscript Validate; Show Running-Config; System Log (Syslog) - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

configscript validate

This command validates a configuration script file by parsing each line in the script file where
<scriptname> is the name of the script to be validated. The validation will stop at the first failure of
a command..
Format
Mode

show running-config

This command is used to display/capture the current setting of different protocol packages
supported on switch. This command displays/captures only commands with settings/
configurations with values that differ from the default value. The output is displayed in script
format, which can be used to configure another switch with the same configuration.
When a script name is provided, the output is redirected to a configuration script. The option [all]
will also enable the display/capture of all commands with settings/configurations that include
values that are same as the default values. If the optional <scriptname> is provided with a file
name extension of ".scr", the output will be redirected to a script file.
Format
Mode

System Log (Syslog)

This section provides a detailed explanation of the Syslog commands. The commands are divided
into two functional groups:
• Show commands display spanning tree settings, statistics, and other information.
• Configuration Commands configure features and options of the device. For every
configuration command there is a show command that displays the configuration setting.
8-66
configscript validate <scriptname>
Privileged EXEC
show running-config [all] [<scriptname>]
Privileged EXEC
202-10088-01, March 2005
Switching Commands