No Ip Irdp Address; Ip Irdp Holdtime; No Ip Irdp Holdtime; Ip Irdp Maxadvertinterval - NETGEAR ProSafe FSM7328S User Manual
Layer 3 managed switch software
Hide thumbs
Also See for ProSafe FSM7328S:
- Administration manual (124 pages) ,
- Hardware installation manual (40 pages) ,
- Operating instructions manual (24 pages)
Table of Contents
Advertisement
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Mode
no ip irdp address
This command configures the default address to be used to advertise the router for the interface.
Format
Mode
ip irdp holdtime
This command configures the value, in seconds, of the holdtime field of the router advertisement
sent from this interface. The range is the maxadvertinterval to 9000 seconds.
Default
Format
Mode
no ip irdp holdtime
This command configures the default value, in seconds, of the holdtime field of the router
advertisement sent from this interface.
Format
Mode
ip irdp maxadvertinterval
This command configures the maximum time, in seconds, allowed between sending router
advertisements from the interface. The range for maxadvertinterval is 4 to 1800 seconds.
Default
Format
Mode
no ip irdp maxadvertinterval
This command configures the default maximum time, in seconds.
Format
Mode
Routing Commands
Interface Config
no ip irdp address
Interface Config
3 * maxinterval
ip irdp holdtime <maxadvertinterval-9000>
Interface Config
no ip irdp holdtime
Interface Config
600
ip irdp maxadvertinterval <4-1800>
Interface Config
no ip irdp maxadvertinterval
Interface Config
202-10088-01, March 2005
10-19
Advertisement
Table of Contents
