Virtual Lan Routing Commands; Vlan Routing; No Vlan Routing - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Mode
Ad Mode
Max Int
Min Int
Adv Life
Preferences

Virtual LAN Routing Commands

This chapter provides a detailed explanation of the Virtual LAN Routing commands. The
commands are divided by functionality into the following different groups:
• Show commands are used to display switch settings, statistics and other information.
• Configuration Commands are used to configure features and options of the switch. For every
configuration command there is a show command that will display the configuration setting.
• Copy commands are used to transfer configuration and informational files to and from the
switch.

vlan routing

This command creates routing on a VLAN. The <vlanid> value has a range from 1 to 4094.
Format
Mode

no vlan routing

This command deletes routing on a VLAN. The <vlanid> value has a range from 1 to 4094.
Format
Routing Commands
Privileged EXEC and User EXEC
Displays the advertise mode which indicates whether router dis-
covery is enabled or disabled on this interface.
Displays the maximum advertise interval which is the maximum
time allowed between sending router advertisements from the
interface in seconds.
Displays the minimum advertise interval which is the minimum
time allowed between sending router advertisements from the
interface in seconds.
Displays advertise lifetime which is the value of the lifetime field
of the router advertisement sent from the interface in seconds.
Displays the preference of the address as a default router address,
relative to other router addresses on the same subnet.
vlan routing <vlanid>
VLAN Database
no vlan routing <vlanid>
202-10088-01, March 2005
10-21