User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
no port-channel staticcapability
This command disables the support of static port-channels (link aggregations - LAGs) on the
device.
Format
Mode
port lacpmode
This command enables Link Aggregation Control Protocol (LACP) on a port.
Default
Format
Mode
no port lacpmode
This command disables Link Aggregation Control Protocol (LACP) on a port.
Format
Mode
port lacpmode all
This command enables Link Aggregation Control Protocol (LACP) on all ports.
Format
Mode
no port lacpmode all
This command disables Link Aggregation Control Protocol (LACP) on all ports.
Format
Mode
8-114
no port-channel staticcapability
Global Config
disabled
port lacpmode
Interface Config
no port lacpmode
Interface Config
port lacpmode all
Global Config
no port lacpmode all
Global Config
202-10088-01, March 2005
Switching Commands