Ip Http Server; No Ip Http Server; Show Ip Http - NETGEAR ProSafe FSM7328S User Manual
Layer 3 managed switch software
Hide thumbs
Also See for ProSafe FSM7328S:
- Administration manual (124 pages) ,
- Hardware installation manual (40 pages) ,
- Operating instructions manual (24 pages)
Table of Contents
Advertisement
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
ip http server
This command enables access to the switch through the Web interface. When access is enabled,
the user can login to the switch from the Web interface. When access is disabled, the user cannot
login to the switch's Web server.
Disabling the Web interface takes effect immediately. All interfaces are effected.
Default
Format
Mode
no ip http server
This command disables access to the switch through the Web interface. When access is disabled,
the user cannot login to the switch's Web server.
Format
Mode
show ip http
This command displays the http settings for the switch.
Format
Mode
Secure-Server Administrative Mode This field indicates whether the administrative
Secure Protocol Level The protocol level may have the values of SSL3, TSL1, or both
Secure Port
HTTP Mode
Security Commands
enabled
ip http server
Privileged EXEC
no ip http server
Privileged EXEC
show ip http
Privileged EXEC
mode of secure HTTP is enabled or disabled.
SSL3 and TSL1.
This field specifies the port configured for SSLT.
This field indicates whether the HTTP mode is enabled or dis-
abled.
202-10088-01, March 2005
9-25
Advertisement
Table of Contents
