Show Spanning-Tree Mst Port Summary; Show Spanning-Tree Mst Summary - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Point To Point MAC Status
CST Regional Root
CST Port Cost

show spanning-tree mst port summary

This command displays the settings of one or all ports within the specified multiple spanning tree
instance. The parameter <mstid> indicates a particular MST instance. The parameter {<slot/port>
| all} indicates the desired switch port or all ports.
If 0 (defined as the default CIST ID) is passed as the <mstid>, then the status summary is
displayed for one or all ports within the common and internal spanning tree.
Format
Mode
MST Instance ID
Slot/Port
Type
STP State
Port Role
Link Status
Link Trap

show spanning-tree mst summary

This command displays summary information about all multiple spanning tree instances in the
switch. On execution, the following details are displayed.
Format
Mode
MST Instance ID List
For each MSTID:
Switching Commands
Derived value indicating if this port is part of a point to
point link
.
The regional root identifier in use for this port.
The configured path cost for this port.
show spanning-tree mst port summary <mstid> {<slot/
port> | all}
Privileged EXEC and User EXEC
The MST instance associated with this port.
Valid slot and port number separated by forward slashes.
Currently not used.
The forwarding state of the port in the specified spanning tree
instance
The role of the specified port within the spanning tree.
The operational status of the link. Possible values are "Up" or
"Down".
The link trap configuration for the specified interface.
show spanning-tree mst summary
Privileged EXEC and User EXEC
List of multiple spanning trees IDs currently configured.
202-10088-01, March 2005
8-131