Show Sysinfo; Snmp-Server; System Management Commands - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Mode

show sysinfo

This command displays switch information.
Format
Mode
Switch Description
System Name
System Location
System Contact
System ObjectID
System Up Time
MIBs Supported

snmp-server

This command sets the name and the physical location of the switch, and the organization
responsible for the network.The range for name, location and contact is from 1 to 31 alphanumeric
characters.
Default
Format
Mode

System Management Commands

These commands manage the switch and show current management settings. The commands are
divided into two functional groups:
Switching Commands
Privileged EXEC
show sysinfo
Privileged EXEC
Text used to identify this switch.
Name used to identify the switch.
Text used to identify the location of the switch. May be up to 31
alpha-numeric characters. The factory default is blank.
Text used to identify a contact person for this switch. May be up
to 31 alpha-numeric characters. The factory default is blank.
The base object ID for the switch's enterprise MIB.
The time in days, hours and minutes since the last switch reboot.
A list of MIBs supported by this agent.
none
snmp-server {sysname <name> | location <loc> | contact
<con>}
Global Config
202-10088-01, March 2005
8-15