Patch Panels And Cables - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Figure 12-4 illustrates crossover twisted pair cable.
Figure 12-4: Crossover Twisted-Pair Cable

Patch Panels and Cables

If you are using patch panels, make sure that they meet the 100BASE-TX requirements. Use
Category 5 UTP cable for all patch cables and work area cables to ensure that your UTP patch
cable rating meets or exceeds the distribution cable rating.
To wire patch panels, you need two Category 5 UTP cables with an RJ-45 plug at each end, as
shown here.
Figure 12-5: Category 5 UTP Cable with Male RJ-45 Plug at Each End
B-4 Cabling Guidelines
202-10088-01, March 2005