User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
no mac access-group <name> {in|out}
This command removes a MAC ACL identified by <name> from the interface in a given direction.
Format
Mode
show mac access-list <name>
This command displays a MAC access list and all of the rules that are defined for the ACL. The
<name> parameter is used to identify a specific MAC ACL to display.
Format
Mode
Rule Number
Action
Source MAC Address
Source MAC Mask
Destination MAC Address
Destination MAC Mask
Ethertype
VLAN ID
COS
Secondary VLAN ID
Secondary COS
Assign Queue
Redirect Interface
show mac access-lists
This command displays a summary of all defined MAC access lists in the system.
Format
Mode
Name
Number of Rules
11-4
no mac access-list <name> {in|out}
Global Config or Interface Config
show mac access-list <name>
Privileged EXEC
The ordered rule number identifier defined within the ACL.
Displays the action associated with each rule. The possible val-
ues are Permit or Deny.
Displays the source MAC address for this rule.
Displays the source MAC mask for this rule.
Displays the destination MAC address for this rule.
Displays the destination MAC mask for this rule.
Displays the Ethertype keyword or custom value for this rule.
Displays the VLAN identifier value or range for this rule.
Displays the COS (802.1p) value for this rule.
Displays the Secondary VLAN identifier value or range for this
rule.
Displays the Secondary COS (802.1p) value for this rule.
Displays the queue identifier to which packets matching this rule
are assigned.
Displays the slot/port to which packets matching this rule are for-
warded.
show mac access-lists
Privileged EXEC
The name of the MAC access list.
The number of user-configured rules defined for this ACL.
202-10088-01, March 2005
Quality of Service (QoS) Commands