User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Table 12-3.
IS CLI Mapping (continued)
7300S Series L3 Switch
Package
Command
QOS
config acl rule match srcl4port
range <aclid> <rulenum>
<startport> <endport>
QOS
config acl interface add <slot/port>
<direction> <aclid>
QOS
config acl interface remove <slot/
port> <direction> <aclid>
QOS
config acl rule match dstl4port
number <aclid> <rulenum>
<portnumber>
QOS
config acl rule match srcl4port
number <aclid> <rulenum>
<portnumber>
QOS
config diffserv adminmode
<enable/disable>
QOS
show diffserv info
QOS
show diffserv service info detailed
<slot/port> <in/out>
QOS
show diffserv service info summary
[in/out]
QOS
show diffserv policy detailed
<policyname>
QOS
show diffserv policy summary
QOS
show diffserv service stats detailed
<slot/port> [in/out]
QOS
config diffserv policy create
<policyname> <in/out>
IS CLI Mapping
CLI Command
Mode
Interface
Config
Interface
Config
Interface
Config
Interface
Config
Global
Config
Global
Config
Privileged
EXEC
Privileged
EXEC
Privileged
EXEC
Privileged
EXEC
Privileged
EXEC
Privileged
EXEC
Global
Config
202-10088-01, March 2005
Syntax
ip access-group <1-199> {in | out}
no ip access-group <1-199> {in | out}
ip access-group <1-199> {in | out}
diffserv
no diffserv
show diffserv
show diffserv service <slot/port> {in |
out}
show diffserv service brief [in | out]
show policy-map <policymapname>
show policy-map
show policy-map interface <slot/port>
{in | out}
policy-map <policyname> {in | out}
A-3