Show Spanning-Tree Mst Port Detailed - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
STP BPDUs Transmitted
STP BPDUs Received
RST BPDUs Transmitted
RST BPDUs Received
MSTP BPDUs Transmitted
MSTP BPDUs Received

show spanning-tree mst port detailed

This command displays the detailed settings and parameters for a specific switch port within a
particular multiple spanning tree instance. The instance <mstid> is a number that corresponds to
the desired existing multiple spanning tree instance. The <slot/port> is the desired switch port.
Format
Mode
MST Instance ID
Port Identifier
Port Priority
Port Forwarding State
Port Role
Auto-Calculate Port Path Cost This indicates whether auto calculation for port path
Port Path Cost
Auto-Calculate External Port Path Cost This indicates whether auto calculation for
External Port Path Cost
Designated Root
Designated Port Cost
Designated Bridge
Designated Port Identifier
Switching Commands
Spanning Tree Protocol Bridge Protocol Data Units sent
Spanning Tree Protocol Bridge Protocol Data Units received.
Rapid Spanning Tree Protocol Bridge Protocol Data Units sent
Rapid Spanning Tree Protocol Bridge Protocol Data Units received.
Multiple Spanning Tree Protocol Bridge Protocol Data Units sent
Multiple Spanning Tree Protocol Bridge Protocol Data Units received.
show spanning-tree mst port detailed <mstid> <slot/
port>
Privileged EXEC and User EXEC
Current spanning tree state of this port
cost is enabled or not.
Configured value of the Internal Port Path Cost parameter
external port path cost is enabled or not.
Configured value of the external Port Path Cost parameter
The Identifier of the designated root for this port.
Path Cost offered to the LAN by the Designated Port
B
ridge Identifier of the bridge with the Designated Port.
Port on the Designated Bridge that offers the lowest cost to
the
LAN
202-10088-01, March 2005
8-137