Spanning-Tree Mst Vlan; No Spanning-Tree Mst Vlan; Spanning-Tree Port Mode; No Spanning-Tree Port Mode - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
If 0 (defined as the default CIST ID) is passed as the <mstid>, then this command sets the Bridge
Priority parameter for the common and internal spanning tree to the default value, i.e. 32768.
Format
Mode

spanning-tree mst vlan

This command adds an association between a multiple spanning tree instance and a VLAN. The
VLAN will no longer be associated with the common and internal spanning tree. The instance
<mstid> is a number that corresponds to the desired existing multiple spanning tree instance. The
<vlanid> corresponds to an existing VLAN ID.
Format
Mode

no spanning-tree mst vlan

This command removes an association between a multiple spanning tree instance and a VLAN.
The VLAN will again be associated with the common and internal spanning tree. The instance
<mstid> is a number that corresponds to the desired existing multiple spanning tree instance. The
<vlanid> corresponds to an existing VLAN ID.
Format
Mode

spanning-tree port mode

This command sets the Administrative Switch Port State for this port to enabled.
Default
Format
Mode

no spanning-tree port mode

This command sets the Administrative Switch Port State for this port to disabled.
Format
Mode
Switching Commands
spanning-tree mst priority <mstid>
Global Config
spanning-tree mst vlan <mstid> <vlanid>
Global Config
no spanning-tree mst vlan <mstid> <vlanid>
Global Config
disabled
spanning-tree port mode
Interface Config
no spanning-tree port mode
Interface Config
202-10088-01, March 2005
8-125