No Sntp Multicast Client Poll-Interval; Sntp Server; No Sntp Server; Show Sntp - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

no sntp multicast client poll-interval

This command will reset the poll interval for SNTP multicast clients to its default value.
Format
Mode

sntp server

This command configures an SNTP server (with a maximum of three) where the server address
can be an ip address or a domain name and the address type either ipv4 or dns. The optional
priority can be a value of 1-3, the version a value of 1-4, and the port id a value of 1-65535.
Format
Mode

no sntp server

This command deletes an server from the configured SNTP servers.
Format
Mode

show sntp

This command is used to display SNTP settings and status.
Format
Mode
Last Update Time
Last Attempt Time
Last Attempt Status
Broadcast Count
Switching Commands
no sntp multicast client poll-interval
Global Config
sntp server <ipaddress/domain-name> <addresstype>
[<priority> [<version> [<portid>]]]
Global Config
no sntp server remove <ipaddress/domain-name>
Global Config
show sntp
Privileged Exec
Time of last clock update.
Time of last transmit query (in unicast mode).
Status of the last SNTP request (in unicast mode) or unsolicited
message (in broadcast mode).
Current number of unsolicited broadcast messages that have been
received and processed by the SNTP client since last
reboot.
202-10088-01, March 2005
8-75