NETGEAR ProSafe FSM7328S User Manual page 127

Layer 3 managed switch software
Hide thumbs Also See for ProSafe FSM7328S:
Table of Contents

Advertisement

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Format
Mode
VLAN ID
VLAN Name
VLAN Type
Slot/Port
Current
Configured
Tagging
Switching Commands
show vlan <vlanid>
Privileged EXEC and User EXEC
There is a VLAN Identifier (VID) associated with each VLAN.
The range of the VLAN ID is 1 to 4094.
A string associated with this VLAN as a convenience. It can be
up to 32 alphanumeric characters long, including blanks. The
default is blank. VLAN ID 1 always has a name of `Default`. This
field is optional.
Type of VLAN, which can be Default, (VLAN ID = 1), a static
(one that is configured and permanently defined), or Dynamic
(one that is created by GVRP registration).
Valid slot and port number separated by forward slashes. It is pos-
sible to set the parameters for all ports by using the selectors on
the top line.
Determines the degree of participation of this port in this VLAN.
The permissible values are:
Include - This port is always a member of this VLAN. This is
equivalent to registration fixed in the IEEE 802.1Q standard.
Exclude - This port is never a member of this VLAN. This is
equivalent to registration forbidden in the IEEE 802.1Q standard.
Autodetect - Specifies to allow the port to be dynamically regis-
tered in this VLAN via GVRP. The port will not participate in this
VLAN unless a join request is received on this port. This is
equivalent to registration normal in the IEEE 802.1Q standard.
Determines the configured degree of participation of this port in
this VLAN. The permissible values are:
Include - This port is always a member of this VLAN. This is
equivalent to registration fixed in the IEEE 802.1Q standard.
Exclude - This port is never a member of this VLAN. This is
equivalent to registration forbidden in the IEEE 802.1Q standard.
Autodetect - Specifies to allow the port to be dynamically regis-
tered in this VLAN via GVRP. The port will not participate in this
VLAN unless a join request is received on this port. This is
equivalent to registration normal in the IEEE 802.1Q standard.
Select the tagging behavior for this port in this VLAN.
Tagged - specifies to transmit traffic for this VLAN as tagged
frames.
202-10088-01, March 2005
8-57

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fsm7352s7300s series

Table of Contents