Script Validate; Packet Capture; Capture Transmit Packet; Capture Receive Packet - NETGEAR FSM7328PS - ProSafe 24 Port 10/100 L3 Managed Stackable Switch Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

18.5.5 script validate

This command validates a script file by parsing each line in the script file where
<scriptname>
used as a tool for script development. Validation identifies potential problems. It might not
identify all problems with a given script on any given device.
Format
Mode

18.6 Packet Capture

Packet capture commands assist in troubleshooting protocol-related problems with the
management CPU. The packets to and from the management CPU can be captured in an
internally allocated buffer area for export to a PC host for protocol analysis. Public domain
packet analysis tools like Ethereal can be used to decode and review the packets in detail.
Capturing can be performed in a variety of modes, either transmit-side only, receive-side
only, or both. The number of packets captured will depend on the size of the captured
packets.

18.6.1 capture transmit packet

This command enables the capturing of transmit packets.
Format
Mode
18.6.1.1 no capture transmit packet
This command disables the capturing of transmit packets.
Format
Mode

18.6.2 capture receive packet

This command enables the capturing of receive packets.
Format
Mode
System Maintenance Commands
is the name of the script to validate.The validate option is intended to be
script validate <scriptname>
Global Config
capture transmit packet
Global Config
no capture transmit packet
Global Config
capture receive packet
Global Config
v3.0, January 2008
18-31