NETGEAR ProSafe FSM7328S User Manual page 299

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Conform DSCP Value
Conform IP Precedence Value This field shows the IP Precedence mark value if the con-
Exceed Action
Exceed DSCP Value
Exceed IP Precedence Value This field shows the IP Precedence mark value if this
Non-Conform Action
Non-Conform DSCP Value This field displays the DSCP mark value if this action is
Non-Conform IP Precedence Value This field displays the IP Precedence mark value if
Bandwidth
Expedite Burst Size (KBytes) This field displays the maximum guaranteed amount of
Shaping Average
Shape Committed Rate (Kbps) This field is displayed if average or peak rate shaping is
Shape Peak Rate (Kbps) This field is displayed if peak rate shaping is in use. It displays
Random Drop Minimum Threshold This field displays the RED minimum thresh-
Quality of Service (QoS) Commands
This field shows the DSCP mark value if the conform action is
markdscp.
form action is markprec.
The current setting for the action taken on a packet considered to
exceed to the policing parameters. This is not displayed if polic-
ing not in use for the class under this policy.
This field shows the DSCP mark value if this action is markdscp.
action is markprec.
The current setting for the action taken on a packet considered to
not conform to the policing parameters. This is not displayed if
policing not in use for the class under this policy.
markdscp.
this action is markprec.
This field displays the minimum amount of bandwidth reserved
in either percent or kilobits-per-second.
bandwidth reserved in either percent or kilobits-per-second for-
mat.
This field is displayed if average shaping is in use. Indicates
whether average or peak rate shaping is in use, along with the
parameters used to form the traffic shaping criteria, such as CIR
and PIR. This is not displayed if shaping is not configured for the
class under this policy.
in use. It displays the shaping committed rate in kilobits-per-sec-
ond.
the shaping peak rate in kilobits-per-second.
old.This is not displayed if the queue depth management scheme
is not RED.
202-10088-01, March 2005
11-35