No Spanning-Tree Mst; Spanning-Tree Hello-Time - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
If the 'port-priority' token is specified, this command sets the priority for this port within a specific
multiple spanning tree instance or the common and internal spanning tree instance, depending on
the <mstid> parameter. The port-priority value is a number in the range of 0 to 240 in increments
of 16.
Default
Format
spanning-tree mst <mstid> {
Mode

no spanning-tree mst

This command sets the Path Cost or Port Priority for this port within the multiple spanning tree
instance or in the common and internal spanning tree to the respective default values. If the
<mstid> parameter corresponds to an existing multiple spanning tree instance, then the
configurations are done for that multiple spanning tree instance. If however 0 (defined as the
default CIST ID) is passed as the <mstid>, then the configurations are performed for the common
and internal spanning tree instance.
If the 'cost' token is specified, this command sets the path cost for this port within a multiple
spanning tree instance or the common and internal spanning tree instance, depending on the
<mstid> parameter, to the default value, i.e. a pathcost value based on the Link Speed.
If the 'external-cost' token is specified, this command sets the external path cost for this port for
mst '0' instance, to the default value, i.e. a pathcost value based on the Link Speed.
If the 'port-priority' token is specified, this command sets the priority for this port within a specific
multiple spanning tree instance or the common and internal spanning tree instance, depending on
the <mstid> parameter, to the default value, i.e. 128.
Format
Mode

spanning-tree hello-time

8-134
cost : auto
external-cost : auto
port-priorty : 128
{cost <1-200000000> | auto } |
{external-cost <1-200000000> | auto }| port-priority
<0-240>}
Interface Config
no spanning-tree mst <mstid> <cost | external-cost |
port-priority>
Interface Config
202-10088-01, March 2005
Switching Commands