Show Dot1X Users; Show Users Authentication; Users Defaultlogin; Users Login - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

show dot1x users

This command displays 802.1x port security user information for locally configured users.
Format
Mode
User

show users authentication

This command displays all user and all authentication login information. It also displays the
authentication login list assigned to the default user.
Format
Mode
User
System Login
802.1x Port Security

users defaultlogin

This command assigns the authentication login list to use for non-configured users when
attempting to log in to the system. This setting is overridden by the authentication login list
assigned to a specific user if the user is configured locally. If this value is not configured, users will
be authenticated using local authentication only.
Format
Mode

users login

This command assigns the specified authentication login list to the specified user for system login.
The < must be a configured <
user>
If the user is assigned a login list that requires remote authentication, all access to the interface
from all CLI, web, and telnet sessions will be blocked until the authentication is complete.
9-16
show dot1x users <slot/port>
Privileged EXEC
Users configured locally to have access to the specified port.
show users authentication
Privileged EXEC
This field lists every user that has an authentication login list assigned.
This field displays the authentication login list assigned to the user for system
login.
This field displays the authentication login list assigned to the user for 802.1x
port security.
users defaultlogin <listname>
Global Config
and the <
user> listname>
202-10088-01, March 2005
must be a configured login list.
Security Commands