Show Logging Buffered; Show Logging Hosts - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Log Messages:

show logging buffered

This command displays buffered logging (system startup and system operation logs).
Format
Mode
Admin Status
Severity Level Filter
Component Filter
Wrapping Behavior
Log Count
Log Messages:

show logging hosts

This command displays all configured logging hosts.
Format
Mode
Host Index (used for deleting)
Host IP Address
Address Type
Severity Level
Port
Switching Commands
The number of messages received by the log process. This
includes messages that are dropped or ignored
show logging buffered
Privileged EXEC
The current state of the in-memory log.
The minimum severity to log to the in memory log. Messages
with an equal or lower numerical severity are logged.
The component(s) from which received messages are to be
logged to the in memory log. Either a single component id or "all
components" may be specified.
The behavior of the In Memory log when faced with a log full situation.
The count of valid entries in the buffered log.
The number of messages forwarded by the syslog function to a
syslog host. Messages forwarded to multiple hosts are counted
once for each host.
show logging hosts
Privileged EXEC
IP Address of the configured server.
Address Type of Server.
The minimum severity to log to the specified address.
Server Port Number.
messages are sent.
202-10088-01, March 2005
This is the port on the local host from which syslog
8-71