Show Spanning-Tree Interface - NETGEAR ProSafe FSM7328S User Manual

Layer 3 managed switch software
Hide thumbs Also See for ProSafe FSM7328S:
Table of Contents

Advertisement

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
CST Regional Root
Regional Root Path Cost Path cost to the common spanning tree Regional Root.
Associated FIDs
Associated VLANs
When the "brief" optional parameter is included, this command displays spanning tree settings for
the bridge. In this case, the following details are displayed.
Bridge Priority
Bridge Identifier
Bridge Max Age
Hello Time
Bridge Forwarding Delay Specifies the time spent in "Listening and Learning" mode
Bridge Hold Time

show spanning-tree interface

This command displays the settings and parameters for a specific switch port within the common
and internal spanning tree. The <slot/port> is the desired switch port. The following details are
displayed on execution of the command.
Format
Modes
Port mode
Port Up Time Since Counters Last Cleared
STP BPDUs Transmitted
STP BPDUs Received
RST BPDUs Transmitted
RST BPDUs Received
8-128
Bridge Identifier of the common spanning tree regional root. It is
derived using the bridge priority and the base MAC address of the
bridge.
List of forwarding database identifiers currently associated with this instance.
List of VLAN IDs currently associated with this instance.
Specifies the bridge priority for the spanning tree.
The bridge identifier for the selected instance.
Specifies the bridge maximum age for the spanning tree.
Configured value of the parameter for the common spanning tree.
before forwarding packets. Bridge Forwarding Delay must be
greater or equal to "(Bridge Max Age/2) + 1". The time range is
from 4 seconds to 30 seconds. The default value is 15.
Minimum time between transmission of Configuration Bridge
Protocol Data Units (BPDUs).
show spanning-tree interface <slot/port>
Privileged EXEC
User EXEC
Enabled or disabled
minutes, and seconds.
Spanning Tree Protocol Bridge Protocol Data Units sent
Spanning Tree Protocol Bridge Protocol Data Units received.
Rapid Spanning Tree Protocol Bridge Protocol Data Units sent
Rapid Spanning Tree Protocol Bridge Protocol Data Units received.
202-10088-01, March 2005
.
Time since port was reset, displayed in days, hours,
Switching Commands

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fsm7352s7300s series

Table of Contents