Port-Channel; No Port-Channel; Port-Channel Adminmode All; No Port-Channel Adminmode - NETGEAR ProSafe FSM7328S User Manual

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

port-channel

This command configures a new port-channel (LAG) and generates a logical slot/port number for
the port-channel. The <name> field is a character string which allows the dash '-' character as well
as alphanumeric characters. Display this number using the "show port-channel".
Note:
Before including a port in a port-channel, set the port physical mode. See 'speed' command.
Format
Mode

no port-channel

This command deletes a port-channel (LAG).
Format
Mode

port-channel adminmode all

This command enables a port-channel (LAG). The interface is a logical slot/port for a configured
port-channel. The option
mode setting.
Format
Mode

no port-channel adminmode

This command disables a port-channel (LAG). The interface is a logical slot/port for a configured
port-channel. The option
mode setting.
Format
Mode

port-channel linktrap

This command enables link trap notifications for the port-channel (LAG). The interface is a logical
slot/port for a configured port-channel. The option
the same administrative mode setting.
Switching Commands
port-channel <name>
Global Config
no port-channel <name>
Global Config
sets every configured port-channel with the same administrative
all
port-channel adminmode all
Global Config
every configured port-channel with the same administrative
all sets
no port-channel adminmode all
Global Config
202-10088-01, March 2005
sets every configured port-channel with
all
8-115